Home / Industries / Marine / Boat Upholstery
Runabouts, center consoles & sailboats · ConnecticutMarine
Upholstery CT
Helm pods, stern benches, bow seating, berths, cockpit bolsters and sun pads made again to match the outline of your boat. Connecticut owners can plan the whole cockpit from photos.
Shaped to your hullMarine-grade materialsCall (347) 310-7483

Every piece aboard is its own shape
A bow cushion follows how the topsides flare outward. A forward berth tapers toward the stem. A coaming pad bends along the gunwale. Each one also has to clear a hatch, a hinge, a drain or a cleat. Marine upholstery CT owners can drop straight in begins by recording that outline precisely, and only then are the foam and vinyl cut to it.
Eight pieces, none alike
Most marine upholstery CT owners book takes in the entire cockpit.








Hatches, hinges, drains and snaps
Overlook any one of them and the cushion will not sit right.
Openings
Hatch openingsCut through the foam.
Hinge gapsLeft between cushions.
Fastenings
Drain channelsKept open underneath.
Snap rowsPlaced where the old ones sat.




Same outline, all-new upholstery
Each piece was traced from its worn cover, then made in foam that will not absorb water under a marine vinyl skin. That is marine upholstery CT owners can drop into place without trimming a thing.
Get my boat priced →Made for salt air and summer sun
Vinyl rated for marine use or acrylic canvas dyed through the fiber, foam whose cells are sealed against water, UV-resistant thread and stainless snaps that stand up to the salt air along the shoreline. When existing cushions just need new insides and covers, read boat cushion reupholstery.
Marine vinyl
Acrylic canvas
Closed-cell foam
Stainless snapsHow it works
Record the shape
Trace, template or drawing.
Cut the foam
Exactly to the pattern.
Sew the cover
Thread, piping and fasteners.
Check the fit
Against every hatch and hinge.
From pontoons to sailboats
One method, whatever you run on the Sound.



Marine Upholstery FAQ
Common questions about marine upholstery CT boaters send us.
How do you make sure it fits?
We trace your old cover, take a template off the base, or work from a drawing with measurements.
Which materials do you use?
Vinyl rated for marine use or solution-dyed canvas, water-resistant closed-cell foam, UV-resistant thread and stainless fasteners.
Can new pieces match the upholstery I am keeping?
Yes. We take color and piping from whatever you are keeping aboard.
Can you do an entire boat?
Yes, anything from one cushion to the full cockpit plus the cabin.
What do you need to quote marine upholstery CT wide?
Text or email a photo of every piece, plus the make of boat, to (347) 310-7483 or office@leatherrestorepro.com.
Send a picture of every piece
A photo of each piece and the make of boat is all we need to put a number on it. Nothing is booked until you say yes.
Or call (347) 310-7483 · office@leatherrestorepro.com