Leather Restore Pro Connecticut

Leather restoration · Greenwich to New London
Free Estimate
Menu
Services
Commercial
Locations
Industries
Furniture
Brands
Before & AfterContact Free Estimate
An airbrush recoloring a repaired vinyl chair arm

Home / Industries / Beauty & Wellness / Furniture Repair

Salons, barbershops, nail bars & spas · Connecticut

Salon Furniture
Repair CT

Hot-tool burns, set-in color, split seams, cracked seat edges and rubbed sides fixed on the panel that is damaged, while the rest of the cover stays as it is. Salon furniture repair CT owners can start with one photo.

One panel at a timeColor and sheen matchedCall (347) 310-7483

A small patch where the color layer has worn through black vinyl
What usually goes wrong

A damaged spot, not a damaged chair

Salon seating rarely wears out evenly. A curling wand rests on an arm pad for a moment and leaves a crater, tint sits on the same corner for months, a seam lets go where the back bends. Most of the cover is still fine. Salon furniture repair deals with that one spot: if the vinyl still bends without cracking and most of its color is intact, fixing the panel is the sensible, smaller job.

Local damageRepair the panel.
Faded all overRecolor the chair.
Cracks when bentRecover it.
The six we see most

Six kinds of salon damage

Each one starts small and gets worse with every wipe-down.

On the surface

  • Burns and cuts on upholstery
    Burns and cutsA hot tool or blade, through to the backing.
  • Set-in color on upholstery
    Set-in colorTint that has soaked into the finish.
  • Product film on upholstery
    Product filmSerum and spray darkening the headrest.

At seams and edges

  • Opening seams on upholstery
    Opening seamsStitches parting where the back flexes.
  • Worn front edges on upholstery
    Worn front edgesColor rubbed off where clients slide.
  • Rubbed sides on upholstery
    Rubbed sidesCapes, aprons and tool belts brushing past.
A cracked gray vinyl chair arm before repairBefore
The same arm after repairAfter
One arm, one repair

Fixed where it broke

The crack in this arm pad was filled, grained and recolored on that pad alone; the seat and back were not touched. That is the scale salon furniture repair CT customers usually need: one panel, done well enough that nobody in the chair can find it.

Send us a photo
A repair, step by step

Four steps on one panel

Damaged edges are trimmed back to sound vinyl, filled in thin layers, textured to match the grain around them, then colored and topcoated to the same sheen so the repair does not shine. For the same work in a medical setting see healthcare furniture repair.

Filler laid in during a vinyl repairFiller laid in
Grain pressed during a vinyl repairGrain pressed
Color mixed during a vinyl repairColor mixed
Topcoat sprayed during a vinyl repairTopcoat sprayed

How it works

  1. Cut back

    Melted or frayed edges removed.

  2. Fill

    Built up level with the panel.

  3. Grain and color

    Matched to your chair, not a chart.

  4. Seal

    Sheen matched to the rest.

The rest of the room

Not only styling chairs

Salon furniture repair CT shops ask for covers everything clients sit on or lie on.

A black shampoo chair with a white bowl
Shampoo unitsSeams at the neck rest
Worn edge on a black treatment table
Treatment tablesEdges where clients sit up
A white pedicure chair with a black basin
Pedicure chairsArm pads near the basin
A tan leather lounge chair
Reception chairsScuffs in plain view
A blue vinyl waiting bench
Waiting benchesSplits on the seat front
A charcoal rolling stool
StoolsTorn tops on a round seat
Honest limits

When a repair is the wrong answer

We tell you which of these you are looking at before you spend anything. Recommending one recover is better than selling the same repair three times.

Vinyl that cracks when bent

Years of chemicals have hardened it. Filling one crack buys little time; the next one opens beside it. That is reupholstery.

Wet foam underneath

Common on shampoo units and treatment tables. A patched cover over soaked foam fails from the inside.

Already repaired twice

A third repair on the same panel is rarely worth it. That panel wants a new cover.

Questions

Salon Repair FAQ

Questions we get before salon furniture repair CT owners book.

Can you fix a burn from a flat iron or curling wand?

Yes. The melted edge is cut back, the crater filled level, then the grain and color rebuilt over it.

Will the repair be visible?

At normal distance, no. Color is mixed against your chair and the sheen matched so the patch does not look shinier.

Will hair color stains come out?

Often, if the vinyl is sound. Tint that has sat for a long time may need the panel recolored rather than cleaned.

Do we have to do every chair?

No. One chair is fine. We will mention it if others look close behind.

How do I get a price for salon furniture repair CT wide?

Text or email a photo of the damage and the whole chair to (347) 310-7483 or office@leatherrestorepro.com, or use the free estimate form.

Get started

Photograph the damage up close

One close photo of the damage and one of the whole chair tell us whether it is a repair, a recolor or a recover. We cover Fairfield, New Haven, Hartford and New London counties and the rest of the state. Nothing is booked until you say yes.

Or call (347) 310-7483 · office@leatherrestorepro.com

Scroll to Top